thg-corporation

the-hope-group-banner
 
 

Buy Parker Parts Online

hope-direct

one-click-configurator

 
Emergency Service
24/7
Air Compressors ›
Hydraulics ›
Electrical Controls ›
508-393-7660

Take a Video Tour
    of THG Corp

Take-A-Tour-of-THG
  View Video Archive


Our Best Advice

Customers rely on us to help select components, design complex systems, to manufacture, install, and maintain machinery and equipment. We offer our best advice through our blogs.


THG Corporation

The-Hope-Group
The Hope Group is an authorized full-line Parker distributor featuring hydraulic, pneumatic, fluid connector, and sealing products for OEM and MRO applications.

Sorensen-Systems
Sorensen Systems is a designer/builder of custom systems providing clean water, renewable energy sources, and technologically advanced process systems for industry.


Hope-Air-Systems
Hope Air Systems is an authorized distributor for Kaeser Compressor featuring energy efficient rotary screw compressors as well as a designer/builder of skid-mounted packaged compressed air systems.


Hope-Service
Hope Service can dispatch its field service fleet of vehicles and experienced, factory-trained technicians to provide emergency and routine field service to its hydraulic, electrical, and compressed air systems customers.

The-Parker-Store
The Hope Group owns and operates seven Parker Stores at its branch locations providing "while you wait" replacement of hose assemblies and immediate on-hand access to 3,000 Parker fluid connector parts.


Hope-Direct
The Hope Group provides 24 hour access to $150 million of Parker parts through its eCommerce website, HopeDirect.com, offering one or two-day shipping of all your hose & fittings, hydraulic, pneumatic, valve, and filtration needs.


iPower
iPower Distribution Group of New England provides supply chain consulting and implementation through streamlined procure-to-pay process, vendor managed inventory (VMI), Kanban, and in-plant buyer-planner services.

 

 
 
 
The Hope Group Home › Engineered Systems › Hydrostatic Drive System
 
 
 

Navigation for TheHopeGroup.com

home-icon
 
engineering-case-study-banner
 

Parker Hydraulics and IQAN Control
Provide Cog Railway Design Solution

The owners and engineers at the Mount Washington Cog Railway made a decision several years ago to introduce their first major redesign of the railway engines that pull its passenger cars to the summit of the 6,288 foot mountain in the White Mountains of New Hampshire. Since 1869 the historical steam engines of the railway have burned through over one ton of soft-grade bituminous coal per round trip to the summit. At the prevailing rate of about $225 per ton (and rising annually) there was a lot of appeal in the concept of a bio-diesel alternative that would reduce the cost to about $60 per trip, a fuel savings of 74 percent.

Beyond the fuel costs, just the annual $100,000 expense for "boiler inspections" had become an economic burden without any obvious solution. Only the elimination of the boiler could stop that expense. Further, with a diesel engine, instead of a boiler, the train could operate with one person in the cab, instead of two, which cut personnel costs in half. And, economics aside, the proposed change reduced the emissions issue, reduced the chance of fires starting along the tracks, and would encourage more riders that otherwise objected to the smoke and dust from the existing engines.

Innovative Hydraulic Solutions

With the switch from a boiler making steam, to a diesel engine driving a Power Take Off pump, a new age was born. The engineers at the Cog Railway designed a new system from the engine, to the braking, to the overall system control. Working closely with the Cog Railway engineers, The Hope Group team introduced several Parker system solutions, including a hydraulic power train drive and hydraulic controls for the braking system.

Two Parker Denison hydrostatic pumps provide electronically controlled variable pressure and flow to two Parker fixed displacement, axial piston hydraulic drive motors. They are coupled to two planetary gear boxes that drive the locomotive's two Cog gears. The decision to go hydraulic was based on the fundamental advantages of hydraulics when it comes to power density.

Even in descent, there is an important requirement for power, ensuring the train comes down the mountain at a slow, safe speed, and under complete control. (No coasting down!). A Parker Denison fixed vane hydraulic pump runs unloaded during the trip up the mountain, but is used as a brake during the descent. A Parker proportional relief valve controls the pressure of the pump, which induces a load on the power train and applies brakes for the locomotive and the passenger coach during the descent.

IQAN System Control

A Parker IQAN-MDL electronic control system provides integrated system management for the locomotive's diesel engine, hydrostatic drive system, braking system, and cooling systems. The control system functions as a master controller, providing a display for the operating engineer, and providing a data gateway. Through the careful selection of an electronically governed diesel engine, the engineering team was able to integrate the Parker IQAN control system with the engine and other power train components. The control system gathers vital engine data from the engine's CANbus protocol and monitors parameters such as engine speed, oil pressure and cooling water jacket temperature. All of the data is transferred directly via a simple connection through two wires where it can be monitored, analyzed and displayed. The multiple screens display vehicle speed, angle of inclination, train location, vibration, and hydraulic filter status.

Monitoring Hydraulic Fluids

A clean engine is a happy engine. To ensure the safe operation of the engine, it's vital to measure and monitor the hydraulic fluids in the system. The IQAN-MDL constantly reads pressure transducers that monitor pressure levels of hydraulic functions. The system can detect possible leaks and can take appropriate action. To ensure clean hydraulic fluid, the engineers installed a Parker Icount particle counter system to measure dirt particles in the fluid from the drain of the two hydrostatic transmissions. If the particle count becomes too high, the MDL alerts the locomotive operator and slows the train before critical damage to the transmission occurs.

Visitors to Mount Washington now have a choice of a traditional steam powered ascent or the revolutionary bio-diesel powered locomotive's now coming on line. Several of the new engines are operating successfully now and more are on the way. The Cog Railway was a true innovation in 1869 and it continues that reputation as an innovator today.



top

 
bio-diesel-conversion
The Hope Group worked closely with the Mt. Washington Cog Railway engineers to design and build a fleet of bio-diesel/hydrostatic locomotives to replace the coal-fired steam boiler machines that have climbed the mountain since 1869. A Parker IQAN MDL electronic module controls and monitors the J1939 engine and the Parker/Denison hydrostatic powertrain.


bio-diesel-powered-locomotive

Al LaPrade, chief engineer and Charlie Kenison, railway manager of the Cog Railway worked together to design and build a fleet of bio-diesel powered locomotives at
Mount Washington.


ron-ruel-cog-railway
Ron Ruel, sales engineer for The Hope Group, worked closely with the engineering and fabrication team at the Cog Railway to complete the first redesign of the railway locomotives since it first opened in 1869.

first-bio-diesel-locomotive-tested
Three years after the concept was proposed, the first bio-diesel locomotive is tested on the cog railway tracks at the Mount Washington Cog Railway.
 
Technical-Support
get-assistance
request-a-quote
order-hope-direct
ask-an-engineer
ask-betsey-508-393-7660
ask-the-owner
view-line-cards
request-a-catalog
parts-configurator
hose-finder-app

Our-Best-Advice
Dave-Maloney   HPU's Use VFD Technology to Run More Efficiently
Dave Maloney
Project Engineer

mike-gardella   eConfigurator Added To My "Helpful Tools" Page
Mike Gardella
VP Engineering & Mfg

Peter-Rhoten   Is Your Compressor Ready For Summer?

Peter Rhoten
Hope Air Systems

Donna-Tibbetts   The Hope Group Celebrated Newly Established ParkerStore
Donna Tibbetts
Operations & Services Mgr.

doug-markham-ipower-new-england   When Should Materials be Stocked at Point of Use?
Doug Markham
President, iPower NE

 
 
 
   
thg-logo

THG Corporation
70 Bearfoot Road
Northborough, MA 01532

Phone: 508-393-7660 | Fax: 508-393-8203 | Email

Terms & ConditionsLegal DisclaimerJobsOur Mission

© 2015, THG Corporation. All rights reserved