thg-corporation

the-hope-group-banner
 

  hope-direct

one-click-configurator

Take a Video Tour
    of THG Corp

Take-A-Tour-of-THG
  View Video Archive

 
 
The Hope Group Home › Products › Hydraulics
 
 
 

Navigation for TheHopeGroup.com

home-icon
 
Hydraulics-Banner
Hope-Service-Logo

• Compressed Air
• Hydraulics
• Electrical Controls

Hope-Service is operated by The Hope Group, which has been designated by Parker Hannifin as a Hydraulic Technology Center. Featuring authorized manufacturer's components from Parker, Kaeser, GE, and other premium suppliers, Hope-Service is prepared to meet your immediate critical service requirements.

Call 508-393-7660 to schedule service

 
Accumulators
hydraulic-accumulators
view-brochure
get-assistance
request-a-quote

Parker offers three types of hydro-pneumatic accumulators; piston, bladder and diaphragm, each with particular advantages depending on the industrial application. Each accumulator regulates the performance of a hydraulic system by providing an additional volume of system fluid, pressurized by an external gas supply.

 
Actuators
hydraulic-actuators
view-brochure
get-assistance
request-a-quote

An actuator is designed to convert fluid power into rotary or linear motion for applications such as upending, turning, roll-over, tilting, indexing, mixing, valve operating, and tensioning. Parker offers a wide selection of pneumatic, hydraulic and vane rotary actuators with low leak rates, high durability, lubrication options, and a range of torque out puts and rotations.

 
Cartridge Valves
hydraulic-cartridge-valves
view-brochure
request-a-quote
buy-direct

A cartridge valve is an ideal choice for any hydraulic control function, whether it's a threaded or slip-in design, such as relief valves, sequence valves, check valves, pressure-reducing valves, pilot-operated, load-control, counterbalance, flow-control, solenoid, or electro-proportional. In addition, one or more cartridge valves in a manifold can be custom built to meet specific requirements.

 
Cylinders
hydraulic-cylinders
view-all
get-assistance
request-a-quote

Parker manufactures and The Hope Group distributes a vast range of standard and special single and double acting tie rod, roundline, welded, telescoping, and 'mill' type hydraulic cylinders, which meet ISO, DIN, NFPA, ANSI and JIC standards.

 
Filtration
hydraulic-filters
view-brochure
request-a-quote
buy-direct

Proper filtration maximizes the reliability of hydraulic systems and components against fluid contaminants. The full line of pressure and return line filters from Parker enhances machine life, reduces maintenance and lowers costs. High, medium and low pressure filters are available, as well as portable filter carts and replacement elements.

 
Gear Pumps
hydraulic-gear-pumps
view-brochure
request-a-quote

The simplicity of a fixed displacement gear pump is derived from the pressure created through the meshing of the gear teeth, which forces fluid around the gears to pressurize the outlet side. Modern gear pumps are not as noisy as in the past and Parker has a wide range of sizes from which to select.

 
Hydrostatic
hydraulic-hydrostatic-transmissions
view-brochure
get-assistance

Hydrostatic transmissions, for off highway vehicle propulsion and other rotary power applications, with fixed or variable hydraulic pumps and fixed or variable motor combinations provide an extended range of motor speeds and torques, with operating pressure up to 5,000 psi continuous and 6,000 psi intermittent. The Hope Group's integrates hydrostatic transmission in fluid power systems, including a redesign to the Mt. Washington Cog Railway.

 
Manifolds
hydraulic-manifolds
request-a-quote
buy-direct

Hydraulic valve manifolds from Parker are available from single cartridge valve manifolds to integrated hydraulic circuit manifolds, including inline, circuit block, and cartridge block manifolds. Also available are conventional remote mounted two, three and five valve manifolds for static pressure, liquid level and flow measurement applications.

 
Motors
hydraulic-motors
view-brochure
request-a-quote

Any rotary power application can be addressed from Parker's extensive line of hydraulic motors, which include low speed high torque motors, such as gerotors and radial piston designs. Parker also offers high speed motors, such as piston, fixed & variable displacement, vane, and gear motors.

 
Power Take Off
hydraulic-power-take-offs
view-brochure
request-a-quote

The auxiliary power market will benefit from the complete line of cast iron, 6-bolt, 8-bolt, 10-bolt, countershaft, split-shaft, power-shift, and front-mount applications from Parker. Air, cable, lever or electric shift options, overspeed control, and flanges for direct or remote mounting to hydraulic pumps are additional features.

 
Power Units
hydraulic-power-unit
learn-more
request-a-quote

The Hope Group offers custom designed and built hydraulic power units as well as Parker's self-contained pre-plumbed HPU's for industrial applications. In sizes from five to 40 gallon, up to 20HP and 3,000 PSI, gear, vane or piston operated, there are very quick turn-around times on Parker hydraulic power units.

 
Pumps
hydraulic-pumps
view-brochure
request-a-quote

Energy efficient hydraulic pumps from Parker include fixed or variable displacement models in piston, vane and gear pumps, available in high pressure or low pressure varieties for a wide range of open loop or closed loop applications. These pumps are available with a full complement of electronic and computer controls.

 
Subsystem Design
vfd-technology-pumps
view-all

The Hope Group is an authorized Parker distributor, which serves as a backdrop to its extensive engineering-design-build capabilties for hydraulic, pneumatic, and automation systems for defense, medical device, semi-conductor, power generation, and marine-mobile applications.

 
Valves
hydraulic-valves
view-brochure
buy-direct

Industrial and mobile valves from Parker range from simple in-line designs to high performance sectional and manifold mounted directional and proportional valves. In-line products include flow and pressure controls, checks, ball and shear seal valves; plus, manifold mounted pressure, directional, proportional control and servo valves.

 
Technical-Support
get-assistance
request-a-quote
order-hope-direct
ask-an-engineer
ask-betsey-508-393-7660
ask-the-owner
view-line-cards
request-a-catalog
view-cad-drawings
hose-finder-app

Our-Best-Advice
kevin-mcknerney   Conduit Energy Recovery Helps Westfield MA Pipeline Project
Kevin McKnerney
Hydraulic Specialist

Benji-Grubel   Are You Keeping the Application in Mind When Selecting Your Hydraulic Hose?
Dave Maloney
Project Engineer

Peter-Rhoten   Oil and Water Are Not Your Friend
Peter Rhoten
Hope Air Systems

Donna-Tibbetts   One of Our Stores is Open 24 Hours a Day!
Donna Tibbetts
Operations & Service Mgr

doug-markham-ipower-new-england   When Should Materials be Stocked at Point of Use?
Doug Markham
President, iPower NE

 
 
 
   
thg-logo

THG Corporation
70 Bearfoot Road
Northborough, MA 01532

Phone: 508-393-7660 | Fax: 508-393-8203 | Email

Terms & ConditionsLegal DisclaimerJobsOur Mission

© 2015, THG Corporation. All rights reserved